Tires: Wrangler tyre inflation, land rover defender 90, tire placard

Question
Why is everyone so coy about advice please?

My Land Rover Defender 90 has Goodyear 205 R16.

What inflation is general please.

Answer
Eric,

On every vehicle sold in the US, there is a sticker – commonly called the tire placard - that lists the original tire size and the proper pressure for that size.  The placard is usually located on a doorpost or in the glove box – but sometimes it is located in the trunk or on the fuel filler door.  I have been told, but do not know for a fact, that vehicle tire placards are used worldwide.

BTW, it doesn't matter who makes the tire or what pressure is listed on the tire's sidewall, if the tire size is the same as the placard, then the pressure listed on placard is also appropriate.

One word of caution:  Some trucks use tires with the letters "LT" in front of the tire size - and some trucks use tires with the letter "P" in front of the tire size - and some trucks use tires with the letter "C" after the tire size.  You should not use "P"'s in place of "LT"'s and vice versa.

You should be sure the pressure on the sidewall equals or exceeds that pressure on the placard.  If you do this the issue about the letter "C" in the sidewall will take care of itself (which is not true with "LT"'s vs "P"'s.)

If you are using a tire size that is different than what is listed on the placard, then the pressure has to be recalculated.  The calculation is not difficult, but it requires tire load tables which are not allowed to be published in the Internet because of copyright laws.  However, I have a copy and would be glad to do the calculation, but the starting point is the vehicle placard: Tire size and inflation pressure.  I will also need to know the new tire size.