Seven standard Phillips screws secure the glove box in your Pontiac G6. A typical hook hinge attaches the bottom part. You may need to remove the glove box to install electronic accessories or access your Engine Control Unit (ECU). It only takes 5-7 minutes to remove it from your dash. The process is the same for all models through 2010.
Disconnect the negative battery cable if you plan on installing or working with any electrical components.
Open your glove box door; remove the items inside. Remove the two Phillips screws from the top portion of your glove box door.
Disconnect the bottom portion of the glove box from its hinge to access the two bottom screws. Remove the screws.
Flip the glove box interior compartment down. The glove box will lower and hang; you'll now have access to the remaining screws on the bottom.
Remove the three Phillips screws securing the bottom portion of the glove box. Pull the glove box assembly out
