If you've ever used a standard car jack to raise your vehicle, you'll appreciate how handy a hydraulic floor jack can be. While a hydraulic jack might look intimidating, it's really not too complicated. Once you learn the basics involved in its use, you won't believe that you ever lived without one. Keep a few things in mind, and before you know it, you'll be jacking up your vehicle in seconds with virtually no effort at all.
Check that the jack is released by inserting the handle into the short pipe-like extension. There will be a notched post inside; slide the handle end over the post and turn the handle counterclockwise. You will feel the hydraulic pressure release with a hissing sound.
Place the saddle part of the jack beneath the lifting point on your vehicle. The saddle will be the highest point on the jack; it is the point that will take the weight of the vehicle.
Turn the handle clockwise until you feel resistance; this is engaging the hydraulic mechanism.
Pump the handle up and down. The vehicle will be raised quickly and efficiently.
Lower the hydraulic jack by slowly turning the handle counterclockwise one half turn. The jack will collapse slightly.
Pull the jack from beneath the vehicle and depress the saddle the rest of the way by pressing down on it with your foot.
