The 2007 Chevrolet Tahoe does not come installed with Bluetooth capability. However, that doesn't mean that buyers will do without the feature. Aftermarket options are available, specifically the GM/Chevrolet Bose HandsFree Bluetooth Phone Car Kit. This device allows hands-free talking and installs seamlessly into the interior of the vehicle. Tahoe owners can install the kit, but professional installers should place the kit. The kit will work with most brands of Bluetooth phones.
Remove the trim surrounding the radio and climate controls by pulling down on the bottom of the trim and working up toward the air vents. Some wires may be connected, but just disconnect these.
Unscrew the bolts holding the radio in place. Once all the bolts are removed, slide the radio out. Disconnect any wires and the antenna from the rear of the radio.
Plug the Bluetooth kit into the position previously taken by the radio.
Run the microphone underneath the carpeting and in between the weather stripping up to the A-pillar near the windshield. The A-pillars are the two angled metal strips the windshield of the car lies in between.
Locate the cigarette lighter plug, remove it and insert the Bluetooth button.
