Sunroofs can be heavenly, but the wind and noise can be enough to make you seal that sunroof shut! Installing an aftermarket sunroof wind deflector for your car is quite simple and can add value and pleasure to driving your vehicle. Although there are many styles of wind deflectors out there, this guide will help you install one that does not require hardware or any special skills.
Choose the right deflector for your car and skills. Depending on your vehicle's make and the deflector chosen, styles range from simple clip-on with no hardware required, others mount with screws and still others simply use double-sided mounting tape.
Clean your vehicle, paying special attention to the rim of the sunroof. Make sure the surface is dry. This will prevent dirt and grit from scratching your car as you decide placement of your deflector.
Place the deflector on the sunroof, positioning it exactly where you would like it. Some models may require you to bend the plastic slightly to get a secure fit. Make note of any tricks you need to do to get a tight fit. Outline the deflector with masking tape.
Scrub the surface around the sunroof frame with an alcohol wipe and make sure to let the area air dry. This prepares the area so the sunroof wind deflector tape will adhere to the area securely.
Peel off the tape backing starting from the one corner of the deflector and gently pull back until all of the tape is exposed.
Lightly place the deflector on the sunroof aligning it with your masking tape markings. Once you're certain that it's positioned correctly, firmly press on the deflector to adhere it to the vehicle.
