Hot Products - Turbo Magazine

Turp_0807_01_z+latest_car_products+brian_crower_nissan_stroker_kit   |   Hot Products

BC Brian Crower
RB25/RB26
Nissan Stroker Kit
Brian Crower delivers a premium quality, very affordable, billet stroker kit to the high-performance RB26DETT tuning market. This complete kit, rated in excess of 1,500 hp, features a 4340 steel billet crank stroked to 79mm, Pro Series steel billet connect- ing rods with ARP fasteners, custom CP pistons with all hardware made to any desired bore size (up to 87mm), and compression ratio. Take it up to a 2.9-liter for massive torque gains and improved spool-up rates.
Brian Crower / www.runbc.com

Turp_0807_02_z+latest_car_products+fidanza_twin_disk_clutch_kit   |   Hot Products

Fidanza
Nissan 350Z, Infiniti G35 And G37
Twin-Disc Clutchesclutches
Fidanza has expanded its new line of performance twin-disc clutches with applications for the Nissan 350Z, Infiniti G35 and G37. The twin-disc clutches dispel the notion that creature comfort must be sacrificed for clamping force. They're engineered to tackle up to 900 lb-ft of torque while stock pedal pressure is virtually unchanged and engagement feels as smooth as a typical Stage 3 single-disc clutch. Using smaller 8-inch diameter discs, Fidanza has carefully controlled the rotating mass of its clutches-while maintaining a sizeable surface area for optimum gripping power-that perform better due to their relatively low moment of inertia. As a result, the transmission is able to rev faster, allowing for rapidly matched transmission shifts. Fidanza has also strapped the floater plate on all of its clutches to eliminate the annoying rattle twin-disc units are known for.

Fidanza twin-disc clutch kits include the pressure plate, floater plate, and twin-discs, as well as a lightweight Fidanza performance flywheel. Stage 1 (650 lb-ft of torque) and Stage 2 (900 lb-ft of torque) kits are available. Best of all, there is only one part number to reference per kit, which makes selection a quick and easy process.

Turp_0807_03_z+latest_car_products+turbosmart_fuel_pressure_gauge   |   Hot Products

Standard clutches are also available from Fidanza for the 350Z, G35, and G37 in four different levels of performance (2.1, 3.2, 4.3, and 5.4)-from mild to wild-to complement driver habits and the performance level of the vehicle.Fidanza / www.fidanza.com

Fuel Pressure Gauge
Turbosmart
Turbosmart's brand-new fuel pressure gauge is a perfect addition to any fuel pressure regulator. Accurate and competitively priced, the Turbosmart unit is a liquid-filled, fuel pressure gauge that's designed to fit all Turbosmart FPRs, and any other regulator with a 1/8 NPT gauge port. Key features include a stainless steel body, 0 to 100 psi (0-7 bar) pressure range, and 1/8 NPT fitting.Turbosmart / www.turbosmartusa.com

Turp_0807_04_z+latest_car_products+zex_wet_nitrous_system   |   Hot Products

ZEX
'03-'06 NISSAN 350Z
Wet Nitrous System
Once again ZEX is at the forefront of nitrous technology with its development of an innovative wet nitrous system designed specifically for the '03 to '06 350Z platform. This nitrous system adds 55 to 100 hp; every hose, wire, and even a custom machined billet fuel rail adapter has been engineered and manufactured for a perfect fit on the 350Z. In addition to a perfect fit and an easy installation, the new ZEX Nissan 350Z nitrous system incorporates the most technically advanced per- formance features available, including the patented ZEX Active Fuel Control. This innovative performance and safety feature automatically adjusts the nitrous fuel enrichment so your engine never runs too rich or too lean.

In addition, the ZEX nitrous system features a throttle by wire compatible electronic TPS switch for perfect system activation at wide-open throttle. Power settings are fully adjustable from 55 to 100 hp with the included tuning jets.ZEX / www.zex.com

Turp_0807_05_z+latest_car_products+57motorsport_g07wt_monoblock_wheel   |   Hot Products

57Motorsport
G07WT Monoblock Wheel
The recent cost of building competitive racing cars is becoming extremely high. The FIA has set out new classifications for WRC and WTCC to help privateers and smaller manufacturers race by reducing the cost of competing. This new regulation called "Super 2000" sets wheel standards to maximum width of 17x9 and minimum weight of 9kg. RAYS specifically developed a wheel to meet these standards and are able to develop the 57Motorsport line for high-end racing use. This wheel is the 57Motorsport G07WT.

Its multi-spoke design allows increased rigidity and the reduction of wheel deflection for increased traction. The reinforced rim's ribbed finish on the wheel body reduces wheel weight and provides more durability. Rollet, the knurled finish on the inside tire bead increases friction between the wheel and tire. It prevents tire slippage for maximum tracing on the track.Mackin Industries /www.mackinindustries.com

Turp_0807_06_z+latest_car_products+iq3_data_logger_dash   |   Hot Products

Racepak
Data Systems
IQ3 Data Logger Dash
Racepak Data Systems releases its new IQ3 Data Logger Dash. The IQ3 merges Racepak's V-net single cable sensor technology and proven GPS-based data logging with a fully programmable display, creating a complete data center. This unique dash features an internal 32-channel data logger, while lap time, track mapping, and speed is obtained by the internal GPS board and three-axis g meter-thus eliminating the need for an external data logger, beacon receiver, and wheel speed sensor. The sensor wiring harness is eliminated by routing all external sensor data to the rear of the dash by a single cable.

The IQ3 features internal 32-channel data logger, GPS, three-axis g meter, 512MB micro SD memory, predictive lap time, four display pages featuring up to 28 total inputs, user-defined shift lights, userdefined alarms with on-screen warning text and lights, a display that is calibrated in both metric and imperial units, track mapping, lap time, segment time, and speed from internal GPS data.RacePak / www.iq3dash.com