| How to Delete A Water Line - Garage Universal Tech
When doing an engine swap, it’s pretty common to come across an unused water line that needs to be plugged off. The simple way is to run down to your local parts house and pick up a rubber cap. Unfortunately, over time these caps tend to crack and become the source of your next water leak. The better option is to remove the factory metal fitting, thread the hole and plug it off. Here’s how it’s done.
Tools Needed: Drill, 5/16"drill bit, 1/8-27 NPT tap, Teflon tape or paste, bench vice, vise grips
| 01 This water neck came off project Bad EF’r. The fitting at the top center is the one that needs to be plugged off.
