Truck Parts And Accessories - Truck Stuff

  |   truck Parts And Accessories ford Lift Kits Falken RS-01D
Falken Tire announced the introduction of its latest rally tire, the off-road RS-01D. Designed specifically for off-road rally competition, the RS-01D provides extreme traction under all racing conditions. Available in soft and medium compounds for varying tracks, the RS-01D also carries DOT certification, allowing the tire to be driven legally on public roads. With sizes ranging from P175/65R14 to P215/60R15, Falken has you covered. For more information, contact: Falken Tire, Dept. TR, 9409 Abraham Way, Santee, CA 92071, (800) 723-2553, www.falkentire.com. Ford Lift Kits
Truckin Suspension is pleased to offer 4-inch and 10-inch 4x4 lift kits for '97-and-later F-150s and Expeditions. The kits include brackets to relocate the front suspension for either a 4- or 10-inch lift; all factory geometry is maintained. The kit bolts on with Grade-8 hardware and minimal cutting. The 10-inch lift also includes a driveline spacer. The kits are constructed from ASTM A569 1/4-inch CNC laser-cut steel. They come with lifted hangers to relocate the rear leaf springs and correct pinion angle for no driveline bind or axle wrap. For more information, contact: Truckin Suspension, Dept. TR, 260 S. Hibbert, Mesa, AZ 85210, (800) 775-7150, www.truckinsuspension.com. Toyota Tundra Aircharger Intake System
K&N's Aircharger intake system adds power to the Toyota Tundra by replacing its entire OE intake system with a direct, virtually unrestricted inlet path to cooler outside air. K&N's Tundra Aircharger system is built around its low-restriction Filtercharger air filter. Constructed out of oil-impregnated cotton gauze and supported by a wire mesh screen, the filtercharger actually straightens airflow as it enters the intake system, to maximize flow. Aircharger installation takes less than a couple of hours with common handtools and is designed to be compatible with OE engine management and emissions systems. For more information, contact: K&N Engineering, Dept. TR, 1455 Citrus Ave., Riverside, CA 92507, (800) 858-3333, (909) 826-4126 (fax), www.knfilters.com. LED Gauge Panel Kit
Nordskog Performance Products offers an LED Gauge Panel Kit that accurately displays information for a variety of vehicle functions. These include speed, odometer with trip, coolant temperature, and fuel level, all with digital LED readouts. Individual LED lights indicate turn signals, high beams, low oil pressure warning, and emergency brake actuated. The display is easy to read and comes complete with the necessary sending units and a billet aluminum bezel for its face. For more information, contact: Nordskog Performance Products, Dept. TR, 1120 Yarnell Pl., Oxnard, CA 93033, (805) 483-2411, (805) 483-2373 (fax), www.nordskogperformance.net. Hidden Audio
Secretaudio from Custom Autosound is a very compact, easily hidden AM/FM 140-watt radio that can be stashed behind the dash, under the seat, and so on. The power unit and LCD controller can be out of sight, with all functions, including optional 10-disc player functions, controlled by a radio frequency remote as far as 50 feet from vehicle, and it leaves the original radio intact. For more information, contact: Custom Autosound, Dept. TR, 1030 W. Williamson Ave., Fullerton, CA 92833, (800) 888-8637, (714) 773-1523, www.custom-autosound.com. '04 F-150 Suspension Lift
Daystar offers a 2.5-inch front lift kit for the '04 F-150 and '03 Expedition. The lift will allow 33- to 35-inch tires, while enhancing the factory ride and handling characteristics. The kit features new isolators, upper strut spacers, and hardware. OEM shocks and struts are retained. For more information, contact: Daystar, Dept. TR, 841 S. 71st Ave., Phoenix, AZ 85043, (623) 907-0081, www.daystarweb.com. Pro Series Modular Pushrod System
Jesel announced the availability of the Pro Series two- and three-piece Modular Pushrods. The three-piece pushrods are constructed of tapered tubing in three different sizes: 9/16- to 1/2-inch, 1/2- to 7/16-inch, or 7/16- to 4/10-inch. The tapered tubing improves strength, durability, and offers increased intake port clearance. Jesel then added cup-style tips for its innovative J-Ball adjusters, which allow for stronger, lighter rockers. These options allow the engine builder to order custom lengths and their choice of various ball or cup tips based specifically on their requirements. Jesel also offers a two-piece Modular Pushrod available with a straight 3/8-inch tube with 0.080-inch wall thickness. The two-piece is also available in custom sizes with various cup or ball tips. For more information, contact: Jesel, Dept. TR, 1985 Cedarbridge Ave., Lakewood, NJ 08701, (732) 901-1800, (732) 901-6777 (fax), www.jesel.com. Roll Top Cover
Pace-Edwards now offers its improved Roll Top Cover. The lid now features standard lock covers to protect the lock cylinder from weather and wear, and WeatherGate tailgate seals to keep weather out of the bed. Grooves have been added to the black powdercoated side rails for easier and faster installation with the optional no-drill clamp kits. As before, the Roll Top Cover features padded weather-resistant vinyl polymer laminated to rigid aluminum panels that glide smoothly along the side rails. For more information, contact: Pace-Edwards Co., Dept. TR, 2400 Commercial Blvd., Centralia, WA 98531, (888) 640-5902, www.paceedwards.com. Optima Battery Box
You don't have to hide that battery any longer. Put in a Bitchin Optima Battery Box. The box can be installed in many convenient locations, looks great, and protects your Optima battery. It can also be installed on other vehicles such as boats, tractors, and RVs. For more information, contact: Bitchin Products Inc., Dept. TR, 2604 Constellation Way, Prescott, AZ 86301, (800) 422-3993, (928) 771-2590, www.bitchinproductsinc.com. California Gold Car Wash
Mothers Polishes offers a jumbo 64-ounce size of its California Gold Car Wash. If you have several vehicles, or just like to wash your car often, the large supply comes in handy. Mothers California Car Wash features a balanced formula for powerful cleaning, yet exacting care. You don't have to worry about stripping the finish or dulling the paint, since the formula cleans your car while protecting the wax. Mothers California Gold Car Wash is strong enough to remove dirt, road film, bugs, bird droppings, airborne pollutants, and other tough grime. For more information, contact: Mothers, Dept. TR, 5456 Industrial Dr., Huntington Beach, CA 92649, (800) 221-8257, (714) 891-3364, (714) 893-1827 (fax), www.mothers.com. Super Sport Cap
SnugTop offers the Super Sport cap to owners of the Dodge Ram Quad Cab. The cap is the ideal complement to the Ram's styling and provides the added convenience of secure cargo storage. Styling features include large frameless side windows, a big all-glass rear door, and an integrated LED rear brake light. The Super Sport cap is painted to match factory colors using the DuPont Chroma Premier basecoat/clearcoat process and is backed by a lifetime warranty on structural integrity and paint fade. For more information, contact: SnugTop, Dept. TR, 1711 Harbor Ave., Long Beach, CA 90813, (562) 432-5454, www.snugtop.com. LS1 Stroker Assemblies
Lunati is pleased to announce the availability of LS1 stroker rotating assemblies for builders looking to supercharge or turbocharge the LS1 engine. The assemblies are available in combinations that will stroke the LS1 to 347, 383, 395, or 408 cubic inches. Each combination is said to result in a mild 8.5:1 compression ratio when used with 67cc combustion chambers, giving your engine plenty of room for extra boost. Each assembly uses Lunati's Pro-Series 4340 non-twist steel LS1 crankshaft, Lunati 6.125-inch Pro Billet connecting rods, Lunati 2618 forged reverse dome pistons, 1.5- to 3mm ring pack, main bearings, and rod bearings. The assembly is internally balanced, and the reluctor ring is installed. For more information, contact: Lunati, Dept. TR, 4770 Lamar Ave., Memphis, TN 38118, (901) 365-0950, www.lunaticamshafts.com. Slam Or Lift
If you're looking to slam or lift your truck, Stillen offers the suspension kit you need, featuring all the right components to raise a truck or SUV, or drop it to the asphalt. Stillen offers kits from various companies such as RCD, Rancho, Eibach, Belltech, Ground Force, DJM, and, of course, Stillen. For more information, contact: Stillen, Dept. TR, 3176 Airway Ave., Costa Mesa, CA 92626, (714) 540-5566, (714) 540-5784 (fax), www.stillen.com. Covercraft Vehicle Covers
Show your Blue Oval pride even when your vehicle is covered. The Covercraft Vehicle Cover from Stylin' Concepts comes with 8- to 12-inch-wide officially licensed Ford logos. Black silk-screened logos are placed just below the front of the hood for maximum front-end styling. Choose four-layer Technalon for maximum indoor and outdoor protection or three-layer Multibond for serious protection from dust and small particles. For more information, contact: Stylin' Concepts, Dept. TR, 7820 E. Pleasant Valley Rd., Independence, OH 44131, (800) 434-3736, www.stylinconcepts.com. Custom Top & Bottom Grille Inserts
J&J Enterprises has created stainless steel horizontal top and bottom grille inserts for the redesigned '04 Ford F-150. The J&J grille inserts fit directly into the F-150's existing factory opening and bolt easily into place, with no cutting or drilling required. The inserts are hand-formed and made of 3/8-inch-diameter T-304 stainless steel tubing for unsurpassed protection against rust and corrosion. For more information, contact J&J Ent., Dept. TR, 5498 Mission Blvd., Ontario, CA 91762, (800) 367-4961, (909) 628-5679, (909) 628-1929 (fax), www.j-jent.com. Tower Rack System
A.R.E. has added a new rooftop rack cargo carrier system as an option for its line of fiberglass truck caps and tonneaus. The new racks feature universal rails, which accept most other manufacturers' tower rack crossbars. They also feature universal crossbars, which work with most manufacturers' T-slotted rack accessories. The locking crossbar system is designed for speedy installation or removal from any truck cap by the user. Additionally, the entire component structure is manufactured to the strictest OEM quality standards, which equates to a long and dependable service life. For more information, contact: A.R.E. Inc., Dept. TR, P.O. Box 1100, Massillon, OH 44648, (800) 649-4273, www.4are.com.