| hot Rod Air Horizontal Drier part
Horizontal Driers
Hot Rod Air is announcing its new line of horizontal driers. These new air-conditioning filter/driers can be mounted in the horizontal, rather than vertical, orientation. These products are perfect for mounting in tight spaces or along the framerail and are available in either black or chrome finish, complete with a mounting bracket.
For more information, contact Hot Rod Air Inc., Dept. TR, 9330 Corporate Dr., Ste. 308, Selma, TX 78154, (888) 357-0040, www.hotrodair.com.
Intake Control System
Design Engineering (DEI) now offers a way for performance enthusiasts with a CryO2 intake system to control the flow of CO2. DEI's Timer Switch has separate on and off settings that can be pre-selected from 2- to 20-second increments, therefore offering numerous duration settings. Depending on the selected settings, a DEI 10-pound tank of CO2 can last as long as 60 minutes.
For more information, contact: Design Engineering Inc., Dept. TR, 36960 Detroit Rd., Avon, OH 44011, (800) 264-9472, www.designengineering.com.
Forward Tilt Hood
Stylin' Concepts introduces a forward-tilt hood kit for '88-'98 Chevy and GMC trucks. With a No-Limit Forward Tilt Hood Kit, it's easy to install. It cuts down install time and includes everything you need to make your factory or custom steel hood tilt forward. Heavy-duty hinges and bracketry are easy to install using common handtools.
For more information, contact: Stylin' Concepts, Dept. TR, 7820 E. Pleasant Valley Rd., Independence, OH 44131, (800) 434-3736, www. stylinconcepts.com.
Tool Wagon With Extended Cab SystemSnap-on Tools Company introduces the Snap-on Tool Wagon with Extended Cab System, which offers nearly twice as much capacity in the unit's top two drawers. The new model features a redesigned top-drawer system, expanding the two 50-inch-wide top drawers to 3- and 5-inch depths. With more than 90,000 cubic inches of storage space, the roll cab and lockers feature 11 drawers, a variety of shelves, compartments, and other storage options. For more information, contact: Snap-on Tools Co., (877) 762-7662, www.snapon.com.
Shift Module
The Dezel Joe Getter shift module by Venom Performance Products is a control unit that features its own micro-controller. This module is connected to the throttle position sensor and the manifold absolute pressure sensor. The module monitors the sensor's output characteristics and modifies the input signal to the vehicle's existing ECU. With 50 percent activation, the product gained 70 hp and 100 lb-ft of torque. It is available for Chevrolet, Dodge, Ford, and RV diesel applications.
For more information, contact: Venom Performance Products, Dept. TR, 8625 Central Ave., Stanton, CA 90680, (800) 959-2865, www.venom-performance.com.
Rumble Bee Cat-Back
Gibson Performance Exhaust introduces a power-producing bolt-on after-cat exhaust system for the '04 Dodge Ram 5.7L Hemi Rumble Bee truck. The system is guaranteed to increase throttle response as much as 15-plus dyno-proven horsepower. It features 3-inch mandrel-bent heavy-duty tubing and is available in aluminized and stainless steel.
For more information, contact: Gibson Performance Exhaust, Dept. TR, 1270 Webb Cir., Corona, CA 92879, (800) 528-3044, www.gibosonperformance.com.
Calmax Colorado
DJM suspension introduces the Calmax system for lowering the new Colorado and Canyon. With the Calmax arms you obtain a full 3-inch front drop, which is alignable to GM specs, and full suspension travel.
For more information, contact: DJM suspension, Dept. TR, 580 W. 184th St., Gardena, CA 90248, (800) 237-6748, www.djmsuspension.com.
New Smoke Screen Kit
The Smoke Screen Kit by AutoLoc allows you to have a huge billow of smoke emerge from your exhaust pipe with just a push of a button. Ideal for car shows and special effects, the Smoke Screen Kit includes high-pressure 1/8-inch copper tubing, compression fittings, one can of AutoLoc Smoke Screen, a baseplate, a 1/8-inch, 12-volt heavy-duty valve, and detailed instructions for installation. This kit is for off-road use only, and is not intended for use while the vehicle is in motion.
For more information, contact: AutoLoc, Dept. TR, 1281 NE 25th, Ste. M, Hillsboro, OR 97124, (800) 873-4038, www.autoloc.com.
