Car Alarms: STARTER KILL, honda accord dx, fuse box

Question
hi i purchased a crimestopper about a month ago. i installed it following u guys wiring chart it all works great but i didnt install the starter kill. wasnt sure what it means to connect wires after fuse box. do i have to remove the fuse box for accsess or cut wire harness at fuse box? 1999 honda accord DX

Answer
"Must interrupt the wire between the keyswitch
and the fusebox, not between the fusebox and
the starter, to keep the check engine light
from coming on"

This means that you locate the BLACK/WHITE
wire closer to the key switch, cut
it up there before it goes into the fuse box,
Yellow butt connect one side of the cut wire to one
of the big black starter kill wires on the
Crimestopper, & then the other. That's simple
built in starter kill from Crimestopper.

Done.

Good luck.

ALARMTEK
ARMACAR.COM