QuestionQUESTION: The door locks do not work, replaced the switch,still nothing. The owner says someone disconnected the alarm,as it always went off. I just want to get his door locks working again. He said they were in the fuse box, all fuses are good, and there are three spots open the normal fuse wont fit in. Do you know where I can go from here?
Please help!
ANSWER: If there was an after market alarm put in,
it could be that there were relays installed
on the lock wires. If unpowered, this could affect
the locks if the alarm was disconnected.
If the door locks were installed after market,
this too can be the reason they don't work.
Also, check the fuses under the hood too.
(Masters are there)
Good hunting.
ALARMTEK-
REMOVESECURITY.com
---------- FOLLOW-UP ----------
QUESTION: Everything is factory, I just think they disconnected the alarm as it was going off and door power is tied in. Can I disable the alarm, and power up the door locks easily?
This deals with a bone stock car, and there are tons of alarm complaints online for this model,door locks, starting, all tied into this alarm unit.
Any advice to just get the door locks to work?
Thanks
AnswerThis is a service we offer here at ALARMTEK.
We sell this info online for these retro fit projects
giving you the proper wire colors, locations and polarities,
plus relay diagrams, tips and links to get it extracted
safely.
If this interests you, COPY CUT N PASTE
THE LINK BELOW TO PURCHASE
https://www.paypal.com/xclick/business=installsupport%40aol.com&item_name=1-Vehicle+Specific+Wiring+Chart&item_number=1-Vehicle+Specific+Wiring+Chart&amount=4.99&no_note=1¤cy_code=USD
Or you can go to my site at
www.REMOVEALARM.com and you'll have what you need
by email shortly after payment is received.
