Car Alarms: uniden car alarm, valet mode, dash area

Question
hi hows it going i dropped my uniden alarm remote the other day and havent been able to start  my car since, i still get a red flash from the remote but car will not start? chhers

Answer
Hmmm, might need to be evaluated by a tech to
trouble shoot the issue. Until then, to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time.

This should over ride the system,
and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE
( if this is a remote starter, the antenna on the
front window glass may also have the over ride
button inset into it.)

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

Then you can go to a site like
www.REMOTES4SALE.com and purchas a remote
to replace yours.

Or, the next step is if wanting to remove it,
is for you to contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM