Car Alarms: code alarm ca630/ford explorer 1998 sprt, code alarm, sprt

Question
hello, when I try to remote start in tach mode, when the car is cold the car starts runs for about 10 seconds and quits . but if I warm it up to normal operating temp, engine speed it works just fine. so the auto start must think it`s running at to high of rpm, ant ideas? thank you!

Answer
Try re learning the tach mode again.
Follow the setting info in the manual and
see if that takes. If not, try tachless again and
see if it can at least start on the second try.

Sometimes, these systems can't read tach well at the coil,
and must go to the cluster pack. Hard.

but it may also mean it was not learned correctly and needs to be re done.

Try it.

ALARMTEK