QuestionHi. I recently installed a Clifford alarm (3303x3 canbus upgrade) that uses the car's original factory keyless remote to arm/disarm. I have a 09 Mercedes C-class (W204). When the car is inactive for couple of hours (for example, when I park it overnight), the Clifford alarm does not respond to the factory key (does not disarm) and there is no Clifford chirp sound, but the car unlocks/locks with the original factory chirp sound as if there is no Clifford alarm installed. The alarm is still activated when I unlock the car and when I start the car, the alarm would go off while the car remains started. When I reset the alarm by turning off the car and pressing unlock on the remote, everything goes back to normal. This only happens when I do not use my car for couple hours. What do you think the problem is? Thanks.
AnswerYour question triggered this
automated responce to a
DEI equipment support inquiry...
Sorry, due to a mutual agreement
between Directed Electronics & myself,
Questions or, support for DEI car alarms,
or remote start/keyless entry systems
will NOT be provided here.
(Please take note of the disclaimer
I posted at the ALLEXPERTS.com site
www.CARPROTECTOR.com )
You can either try www.directed.com or,
take this question to my online 12 volt
installation Technican forum
at www.installsupport.com.
Many of the technicians there can
assist you with this issue.
Good luck.
ALARMTEK
