Car Alarms: pirranna alarm, interior sensors, valet mode

Question
we have a campervan with a pirrhana alarm fitted, it was working fine then now it is not going off. There are 2 interior sensors, the alarm looks like it is working, the light flashes and you can hear a ticking sound, but it doesnt detect movement, the horn on the van is working fine. We had a window smashed the other week and the alarm didnt go off so that is how we found out it wasnt working, I hope you can help, regards, Anne

Answer
It appears from your expaination, that the
after market car alarm is in service mode.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM