Car Alarms: 1996 rav 4 car alarm removal, alarm button, circuit city

Question
i have a 96 rav 4 and i lost my alarm button and after all of the headaches ive had with it i just want it gone. since ive lost the button i can not start my car, the toggle switch under the hood has broken off so i can not disarm without the button. i want to know if there is a wire i can cut or a fuse i can pull, or if removal of it would be to much for a guy with no more experience with cars then changing the oil and brakes? ive looked at getting a new button and would appreciate a cheaper suggestion

Answer
Ok then, get over to the local car alarm shop,
or even a Circuit City or Best Buys will
have a valet switch that will fit for your
alarm.

In the mean time, cut off the switch part,
leaving the 2 wires that wer connected, free.

Then twist together, turn on the ignition,
hold both wires to ground until the siren chirps.

That should reset and place the alarm into
over ride for now. Nothing accept the keyless entry
if installed will operate until you repeat the
same steps.

Then get a new switch and you're all set.

Have a good evening.
Let me know if you were
successful.

ALARMTEK
CARALARMZ.COM