Car Alarms: alarm remote lost, valet mode, dodge neon

Question
I lost the alarm remote for my 1996 dodge neon. I'm sure it is an aftermarket system because of the light on the dash. The alarm is activated, and I can't start the car. How can I disconnect the alarm so that I can drive my car?

Answer
Ok, until you can get a new transmitter to control it,
to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM