Car Alarms: autopage car alarm, alarm features, car alarm

Question
The alarm is still working, but it does not beep when activated as it used too, and it is making a continual noise as if the indicator is on. Thank You.

Answer
Sounds like the alarm is in Long tamper mode.
Please try to locate the valet switch
to overide the alarm.

If you would read some of the previous
posts I made on this subject, you will
see the procedure to toggle into and out
of valet/override mode. It allows
you to set and reset the starter kill mechanism
as well as all other standard alarm features.

This should also apply to yours.

Good luck with it. Should do the trick.

ALARMTEK
INSTALLSUPPORT.COM