Car Alarms: kill switch activated after changed fuses, alarm features, kill switch

Question
i recently had a fuse changed, but the car was still running during the swap. after i turned my car off, i am now unable to start it back up. i know it's the kill switch, but how do i reset it? or deactivate it? i really need to drive. thank you.

Answer
Please try to locate the valet switch
to overide the alarm.

If you would read some of the previous
posts I made on this subject, you will
see the procedure to toggle into and out
of valet/override mode. It allows
you to set and reset the starter kill mechanism
as well as all other standard alarm features.

This should also apply to yours.

Good luck with it. Should do the trick.

ALARMTEK
INSTALLSUPPORT.COM