Car Alarms: wouldnt honk dude, valet mode, dash area

Question
my car is stuck in valet mode and wont honk when using remote lock and unlock buttons and red light stays on is there a way to reset to regular setting

Answer
Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED in your dash area goes off,
and the siren chirps twice.

(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM