Car Alarms: 1999 Toyota Camry Aftermarket Alarm Woes, keyless entry systems, valet mode

Question
Hi,

I have what I believe is an aftermarket alarm (maybe Viper) that was installed
in my 1999 Toyota Camry (purchased used).

At various points, my battery has died or has come loose. In one instance, this
caused my alarm to go berserk every few minutes. The LED indicator on the
dash was flashing red. This was fixed by putting the car into valet mode,
which turned the indicator solid red (ON)

Here's the real question - After a hiccup with a low battery, right now my LED
indicator is OFF.  What does this mean? I have encountered flashing LED (bad
- alarm goes off) and solid ON LED (good, no alarm), but never solid OFF LED.

I am afraid of my alarm going off at an inopportune moment. Could you
please translate what my LED is trying to tell me?

Also, nobody is going to steal my 1999 camry because everybody else in my
neighborhood drives nice cars.. Is it difficult to remove the alarm
permanently?  

Answer
Your question triggered this
automated responce to a
DEI equipment support inquiry...

Sorry, due to a mutual agreement
between Directed Electronics & myself,
Questions or, support for DEI car alarms,
or remote start/keyless entry systems
will NOT be provided here.

(Please take note of the disclaimer
I posted at the ALLEXPERTS.com site
www.CARPROTECTOR.com )

Please try my forum at
www.installsupport.com

Many of the technicians there can
assist you with this issue.

or you can write to my collegue & technician
Carlos at:  carlos.kidwell@gmail.com
for assistance. (busy guy, please be patient.)

Good luck.

ALARMTEK