Car Alarms: mitsubishi factory alarm, keyless entry remotes, circuit city

Question
we have a 1997 montero ls that the reset button is broken and it came with no keyless entry remotes...is there a way to  reset the alarm or  completely disable the alarm and still operate the vehicle?

Answer
Ok then, get over to the local car alarm shop,
or even a Circuit City or Best Buys will
have a valet switch that will fit for your
alarm.

In the mean time, cut off the switch part,
leaving the 2 wires that were connected, free.

Then twist together, turn on the ignition,
hold both wires to ground until the siren chirps.

That should reset and place the alarm into
over ride for now. Nothing accept the keyless entry
if installed will operate until you repeat the
same steps.

Then get a new switch and you're all set.

Have a good day.
Let me know if you were
successful.

ALARMTEK
CARALARMZ.COM