Car Alarms: Car Alarm Toggle Switch broke, chirps, car alarm

Question
Hi, I had seen your previous responses for turning the Toggle switch and starting the ignition. But the toggle switch broke and fell below the dashboard. Is there any way we can turn the alarm off?

Answer
Ok then, get over to the local car alarm shop,
or even a Circuit City or Best Buys will
have a valet switch that will fit for your
alarm.

In the mean time, locate the 2 wires that were
connected and are hanging free.

Then twist together, turn on the ignition,
hold both wires to ground until the siren chirps.

That should reset and place the alarm into
over ride for now. Nothing accept the keyless entry
if installed will operate until you repeat the
same steps.

Then get a new switch and you're all set.

Have a good day.
Let me know if you were
successful.

ALARMTEK
CARALARMZ.COM