Car Alarms: 2000 dodge neon, keyless entry system, remote keyless entry

Question
How do you disarm a factory installed car alarm in this car?

Answer
This "factory alarm", like most all other DODGE
factory alarms, works with the physical action of
locking/arming and unlocking/disarming.
They are intertwind.

There is no single wire to ground or,
spice into. To disarm these, a remote keyless
entry system would be required.

Of course the key in the drivers door, turn left
first to engage the alarm, then right to unlock
and disarm it, is how a factory alarm can be disabled
as well if it's working. But if damaged in some way,
the only other way is to add a factory remote from the
dealer, or an after market keyless entry system to make
the lock mechanism control the factory alarm.

This vehicle also has an immobilizer in the
ignition and the key which would also
need bypassing if malfunctioning.
Dodge would need to reset this if engaged.

Wish I had an easy to do method for you, but
I am just the messenger. I only try to get
around the stuff they throw at you all here!

I hope this was helpful.

ALARMTEK
CARALARMMAN.COM