Car Alarms: alarm issue, jeep cherokee, remotes

Question
I have an Omega R&D #432 on my Jeep Cherokee.  It was installed approxiamately 3 years ago.  This past weekend I had to have a new alternator and battery installed.  I never engaged my alarm after picking my vehicle up from being repaired.  I was using one of my two remotes that the battery was dead.  The good remote was left at the repair shop.  I drove my vehicle for a day with no problems. The second day, my alarm starting sounding when I opened my door after using the key to unlock it. My good remote will not turn my alarm off.  I was having to push the remote buttom multiple times previously to turn it off (prior to repair).  I replaced the battery on the remotes yesterday.  Still having no luck.  I need help! : )

Answer
The best thing here is
to write to my OMEGA Alarm (caralarm.com)
technician at scadss@tmail.com and see if
he can assist you with this issue.

I unfortunately don't know the
system you are working with to advise
you properly on it's functions,
features or trouble shooting
information. Better to check with a tech
that might.

Good luck there.

ALARMTEK
CARALARMMAN.COM