QuestionI have a 1998 Jeep Cherokee with the viper 600hf alarm installed also the Valet remote start (551T I think) My problem lies with the remote. One remote is lost, and the other quit working on me. My mom who also had the Viper 600hf traded in her car and gave me one of the remotes. I took it to the local audio shop and the sales person came out and tried to program the remote for me. (I'm sure he didn't know what he was doing) Anyway, now all 4 buttons on the remote arm/disarm the alarm. How to I reset the remote to the factory settings. (button 1 for lock/unlock) and (button 3 for remote start)...I believe I have 2 programming swithes under the dash. (1 for the 600hf and 1 for the 551T) If it helps any. Thanks!!!
Answer"PLEASE TAKE NOTE!!
I do not provide remote transmitter
programming information here!"?
So sorry, but the note I left on
allexperts.com stating I don't
provide transmitter programming info
must have been missed by you.
Wish I could, but I simply don't provide
that sort of information here at ALARMTEK.
Too many veriables.
I will double check to make sure the
note is still there or, needs to be enlarged
so my visitors will actually read it.
So, if I am mistaken, my sincere apollogies.
If I am not, then this info is
presented as a guide to who might be able
to help you out.
Please try a site like www.keylessride.com.
www.remotesunlimited.com , or www.remotes4you.com
or www.direceted.com
to get they're programming instructions for your
transmitter, or to aquire new ones.
My other advice is try the service department at your
local car dealership to help with this issue.
Good hunting.
ALARMTEK
CARPROTECTOR.com
