Car Alarms: Logixstart works, but no reponse to remotes, alarmtek, remote start

Question
Hi - My alarm/remote start was working just fine up until the battery was removed for a month.  When the power was reapplied, it chirps twice.  However, both remotes no longer seem to control the operation of the alarm or remote start.  Its almost as if its lost frequency or something?
Any help is greatly appreciated.
Thanks!


Answer
It does sound as if the remotes have lost programming
here. I don't know the system so I can't be much help
on the procedures to re program.

Try either the folks you got it from for some support,
or the folks at www.remotesunlimited.com .
They specialize in replacing transmitters, and
might be able to help you too.

Good luck with that.

ALARMTEK