Car Alarms: nissan primera alarm bypass 1994 eGT, key fobs, n issan

Question
hi i would like to know how to get rid of the engine check light and what exactly has been disabled and allso how to bypass so that i can get my car to someone who can fix it because where iu live nobody can come to see it its been aboiut 8 months now and my car is just rusting away its a 1994 n=issan primera eGT with leathers it has no bootlock and the ignition key has snapped in the ignition and also i have 2 key fobs from a diffrent primera and wondered if it was possible to program them to fit mine i am the true owner of this vehicle i can send proof if need be
i would be very very grateful and you would make this christmas very special thanks carl

Answer
If it's the factory alarm that doing this, I have no idea
what to tell you save to contact Nissan for some help.
We don't have that model here in the states,
so I am uncertain as to what to advise.

If it was an aftermarket alarm, I'd say check
the starter wire at the ignition column, to see
if there is a starter kill relay, or device installed.
If there is, remove and re attatch the 2 ends of
the start wire together.
But I am just spit balling here.

The only other way I can suggest to get the car started
is to remove the ignition cylander, replace it with
another, and then go from there. If this is not
possible, then maybe a remote starter, that will
allow it to start up and run the engine.
All things being equal, once you get it to the
nearest Nissan shop, they should
be able to re tool the ignition.

This option would be pretty easy.
Change the cars battery first,
then do the remote starter.

Should be a nice Christmas for you
at that point. That option should work
regardless.

Cheers!

ALARMTEK
STARTERDISABLE.com