Car Alarms: parking light conection with exceeding 5 or 10 amps., constant power, key switch

Question
I tried to put the output wire to parking light circuit,
and my security system was burned out. so please tell me that
How can I put the relay at there.( please  tell me the relay diagram
which is same as head light.)
I have 2 of security system. so I am using the other sucurity system.


-------------------------
Followup To
Question -
My security's Direction tells me that I have to put optional relay if my car is exceeding 10 amps. My security system has (+/-) parking out put, and my car has positive parking light circuit.Please tell me how can I put a relay at there.
Answer -
No relay needed here. The alarm has it built in.
Make certain there is a 10amp fuse inline.

The relay would be used if using the flashing
light output to flash the headlights.

Just attatch directly to the parking light wire.


Good luck on it.

ALARMTEK

Answer
Interesting. Ok then see POSITIVE relays
at www.RELAYHELP.com

Pin 87 and 85 to fused (10 amps) to constant
power at the key switch

pin 86 to the parking light output wire
from the alarm

pin 30 to the parking light wire
in the vehicle.

87a is not used.

That should be it.

ALARMTEK