Car Stereos: finding the right amp, voice coil diameter, voice coils

Question
Hi i brought a cerwin-vega stroker pro 15" subwoofer I'm looking the right amp to power it. without blowing up the subwoofer and frying up the amp here the spec for the 15" stroker pro.
2 voice coils ,
power handling 2500 wrms ,
frequency response 36-200 Hz
voice coil diameter 4.0 "
total lbs. 68.3 lbs
mounting diameter 16 1/4"
through hole 14"
mounting depth  9"
             Thiele-small parameters
fs:    26.4Hz
Qts:   0.72
Qms:   7.8
Qes:   0.79
            3
Vas:   3.6 ft
Xmax:   40mm
                   
revc:   2 x 1.80
                      3
vol. displace:   285 in      3
                   (0.165 ft )
normal impedance:  2x2
sensitivity:    86.3db
i probably gave you more info that you need but its there
thank you for your time i appreciate it
Sincerely Brian

Answer
Hi Brian

just get any amp that will do that kind of power at 1ohm, maybe you will have to get more then one amp. and run each one to each coil or get amps that have the option to be strapped togheter, just stay away from walmart brands, look online for known brands, like JL, Kicker, Mtx, Memphis, Diamond audio, RE Audio, etc. or go to a car audio store and look there.

Hope this helps.