Questioni'm trying to install speakers into my 2000 chevy cavalier. i have no power windows so the crank that opens and closes the windows is not coming out. do you know how to take that off?
AnswerHi Danny
1)Roll the window down. This will make replacing the door panel easier and put things into view better
2)Remove the screw that holds the triangle-shaped plastic piece over the mirror bolts.
3)Next, go down to the door handle grip, and remove the 2 7mm screws out of there.
4)Go along the outside edge of the door panel and remove all those screws.
5)If you have power locks, you will need to disconnect the wires that run to the lock switch. Simply pop the trim piece out that holds the power lock switch, and disconnect it.
6)If you have manual windows, you will need to get the GM tool to remove the window cranks. what holds the crank its a little half ring its located behind the crank and you do need this tool else you might end up with some major damages.
7)Now the only thing stopping you is the clips that run along the top edge, by the window. Gently pull up, and rock the entire door panel side to side.
8)When you are putting the door panels back on, be sure to get all those little clips at the top of the door back on and make sure they are tight, otherwise the door panel won't sit right.
let me know if you have more questions.
Good Luck!
Ed.
