Acura Repair: ABS LIGHT, abs sensor, caliper

Question
MY ABS LIGHT IS ON. I JUST GOT ALL MY BRAKES DONE AND IT STILL COMES ON. WHY IS THE LIGHT STILL ON AND IS THIS A SERIOUS PROBLEM?

Answer
It could be that when whoever did your brakes what they did is that they compressed the caliper instead of bleeding the system. What happens when you do that is the ABS sensor may be triggered, try removing the ground from your battery for 30 min, remember if you do this you will reset all the codes in your car, make sure that you have your codes for the radio handy and so on. The ABS light should go off after that, if the issue persists check with the shop that you had the brakes done at.

If there is anything else please let me know.

Thank you,
Daniel