Chevrolet Repair: serpintine belt for chevy s-10 pickup 4 cylinder, spring tension, smooth side

Question
I just lost my serpentine belt for my 87 chevy s-10 pickup (4 cylinde; manuel shift)and i need to know how to install a new one.

Answer
Hi Chris,
First of all, there should be a map somewhere under the hood showing the routing of the belt.
But in case there isn't, look at the pulleys. Some are smooth, and some are grooved. The smooth side of the belt goes against the smooth pulleys, and grooved to grooved.
Use a 3/8 inch breakover handle in the square hole of the tensioner to pull it against the spring tension to put the belt on the last pulley.
Not as hard as you might at first think.

Van