Chrysler Repair: 2005 Sebring starter motor, hood latch, sebring convertible

Question
I have a 2005 basic sebring convertible, I believe it is a 2.4L and it won't turn over, all it does is clack,clack, clack... I believe it is the starter motor. Can I get to it? I have changed starters and alternators in my past cars, but they have gotten so compact and computerized that I am feeling like a dinosaur these days. Any help you can offer...instructions and advice would be greatly appreciated

Answer
REMOVAL - 4 CYLINDER
Release hood latch and open hood (STARTER - 4 CYLINDER).
Disconnect and isolate the battery negative cable.
Remove the air cleaner box.
Remove the lower bolt.
Remove the upper bolt and ground wire
Remove starter (STARTER REMOVAL - 4 CYLINDER).
Disconnect solenoid wire connector from terminal
Remove nut holding B+ wire to terminal.
Disconnect solenoid and B+ wires from starter terminals.