Chrysler Repair: 01 town and country: ac/heater imbalance, imbalance problem, led lights

Question
problem with ac, rear units blow cold, passenger side is somewhat cool and driver side is cool/warm. unit seems to blow cooler when car is a shaded area also.

brad

Answer
Hi Brad,
The first thing to do is calibrate the system: turn the ignition switch to the 'on' position.
Simultaneously press and hold the 'power' and the 'recirculation' buttons for at least 5 seconds. Then release the buttons and you will notice a couple of the other LED lights start flashing which shows that the calibration has begun and they will continue to flash until it finishes. If the flashing continues beyond 3 minutes in length then there is a fault of some sort that can only be determined by reading out the control panel with a Chrysler Diagnostic Readout Box at a dealership. If the diagnostic ends without further flashing then try out the system to see whether it is improved.
Roland
PS Please 'rate' my answer, and where you see the question about 'volunteer of the month' please consider a 'yes' answer if my response has proven worthwhile. Thanks