QuestionQUESTION: I have a 2000 dodge neon and fuse 10 keeps blowing on it, it happened once and i replaced it, car ran fine for about a week, then it did it again replaced it, and it happened the following day. then i replaced it and it kept popping the fuse, the next day i went back out put a fuse in and my car drove for about 20 miles then it happened again. had to wait an hour before i could get it started to drive back home. PLEASE HELP!!!
ANSWER: buy a service manual and trace down that fuse circuit either a wire issue or a part issue
---------- FOLLOW-UP ----------
QUESTION: i have it, it only does it when my car reatches a certain temp. its supposed to be heating and air, but it kills my car when that fuse blows, any other suggestions?
Answerdo u know what a fuse does? it prevents a component and wire from being melted and causing a fire. If a fuse blows there is to many amps a short to ground.
Either a wire or a part aka pump,or something electrical is drawing to many amps. Look in teh wire diagram part find that fuse u haft to replace and trace it down.
