QuestionMy gauges went out and it's effecting my left blinker and horn. I was told it needed a cluster pack. Is this something I can do myself I can take the dash apart no problem. I can't find anything that tells me where its located.
AnswerHi Paula,
I need to know more to offer help. Are you certain that the horn/gauges/left turn signal went bad simultaneously, or did these problems occur independently? I don't see a common cause between them.
On the instrument cluster, do the following:
With the ignition switch off, press and hold the trip and trip reset buttons,
While holding the buttons, turn on the ignition switch,
After 5 seconds the word CODE will appear in the odometer in window,
then release the buttons,
Then watch for a 3 digit number to replace the word CODE.
Tell me if you see any such numbers. The dash will do a few more tests and the words in the odometer window will change. We can consider those later.
Tell me what you mean by "gauges went out", specifically what is gone, what remains functional on the cluster?
I don't know what a 'cluster pack' is, so I doubt is exists.
What is wrong with the left blinker (what works, what doesn't?)
Roland
PS I saw your question in the 'pool' to which it had been referred.
