Chrysler Repair: Cam and crank sensors location: 2.5L V-6, crank sensor, cam sensor

Question
Where are the cam and crank sensors located on a 2.5L 2000 Chyrsler convertible?

Answer
Hi Nick,
The cam sensor is part of the distributor and apparently is not sold as a separate part, so you don't want to replace that entire unit unless you surely have a fault code displayed (0340).
The crank sensor is located on the firewall side of the engine/trans unit, at the seam between the units sitting just above the transmission housing, where it is inserted through the bell housing case so as to sense the rotation of the flex plate in between the engine and the transmission (0320)
Roland