Chrysler Repair: A Question re: 99 Chrysler Cirrus, blower motor resistor, chrysler cirrus

Question
The blower motor in my 1999 Cirrus only works on high.  It's been noisy for a year and suddenly quit working, only on high.  How do I take the dash apart to get at the motor, and should I replace the whole thing? Also, does anyone know where I could get a nearly free factory manual? Or at least diagrams of what to take apart.

Answer
replace the blower motor resistor as well


BLOWER MOTOR AND WHEEL ASSEMBLY
The blower motor is located on the right side of the heater housing.

REMOVAL
Disconnect battery.
Remove lower right under panel silencer duct.
Remove blower motor connector from resistor block Blower Motor Wiring
Remove blower motor case retaining screws.
Lower blower motor case from housing Blower Motor
Remove fan scroll from motor shaft.
Remove motor from motor case.
INSTALLATION
For installation, reverse the above procedures