Chrysler Repair: 2006 Town & Country Limited Mirror Memory, mirror module, memory buttons

Question
QUESTION: Hi. On my van, the memory buttons work for everything except for the right side view miror. Can you help me figur out what is broken, and where is it located? I'm assuming it's the memory module.

Thanks,

Kamran

ANSWER: can u move the mirror with the switch manually

---------- FOLLOW-UP ----------

QUESTION: Yes, I can move it with the switch to adjust manually.

ANSWER: then yes vary possible the mem seat module is defective.

---------- FOLLOW-UP ----------

QUESTION: Well, can you please tell me where it is located, and how to access it.

Thanks.

Answer
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the driver side front bucket seat retaining nuts from under the vehicle (Refer to 23 - Body/Seats/SEAT - Removal) .  
3. Lift the drivers seat up and out of the mounting holes in the floor pan and lay the seat rearward to access the module located under the seat.
4. Disconnect the memory seat/mirror module electrical connectors. Depress the retaining tab and pull straight apart.
5. Remove the module retaining bolts and remove the module from the bracket.