Chrysler Repair: 98 Breeze:No Start, obd ii reader, plymouth breeze

Question
my 1998 plymouth breeze was stolen from i just recently got it back i had to replace the steering colum, coil pack,and had a key made to fit the car will turn over but it will not start there seems to be no fire to the spark plugs ect please get back to me with any suggestions you may have regarding my problem thank you very much

Answer
Hi Frank,
Do you hear the fuel pump run for about a second when you turn the key to the 'run' position? If not, then you have an issue with the ASD/pcm interconnection or power to the ASD. If you do, but you don't get spark then it could be one of the rotational sensors on the cam or crank. But the most efficient way to sort this out is with a fault code readout. You could try the ignition key to see if anything shows up on the odometer window when you turn the key:"on-off-on-off-on and leave on" doing that in 5 seconds or less elapsed time. If you don't get it that way, then a fault code readout with an OBD-II reader plugged in to the socket under the dash by the steering column would be the other way to get the codes. Let me know what you learn and we'll go from there. Is there anything else with the electricals that still doesn't work, other than spark? How about the anti-theft system, if the car has that?
Roland