Chrysler Repair: Chrysler Concorde LXI: headlamp housing removal, chrysler concorde lxi, chrysler concorde

Question
I have a concorde LXI 2002 and I am wondering how i might get the condensation out of the headlights? Thank you for your time.

Answer
Hi Poppy,
You may not have to do anything as the moisture may dissipate over time. But just in case, here is the procedure according to an answer Kevin gave on 12/11/08 in case you want to remove the bulb and dry out the inside of the headlamp housing.
"REMOVAL - EXCEPT INTREPID
Headlamp lens fogging is a normal condition and does not require service unless excessive or continual. Moisture will vent from tubes or vents located on the back of the lamp.

Release hood latch and open hood.
Disconnect and isolate the battery negative cable.
Remove the headlamp sight shield (300M).
Remove the upper crossmember attachments, both sides, headlamp jackscrews, windshield filler neck screw, and speed control servo screw (HEADLAMP ATTACHMENT).
Lift and prop the crossmember above the headlamp on the side being serviced, and remove the electrical connectors from the headlamp.
Pull headlamp up and under crossmember to remove it from the vehicle."
Roland