Classic/Antique Car Repair: 1965 Mustang front hub replacement, outer bearings, kid brother

Question
I'm restoring a 65 Mustang 200 cid coupe. The front drums are beyond turning. New drums in hand, but, hubs need to be transferred from old drums to new ones. What's the procedure and tooling needed to do this job properly? Of course, new inner and outer bearings and races will be replaced at the same time. Having read many of your posts/answers, I think you're the "go to" guy for this problem.
Thanks in advance,
Tom

Answer
I don't know, specifically, Tom, but as I recall, those hubs were pressed to the drums, and that requires a monster hydraulic press - like 30 tons!   So take the new drums and the old hub/drum assemblies to a machine shop that does custom work - they should have the press required to do the job.  

Great car, by the way - my wife's kid brother had a new 1966 6 cylinder Mustang - and it was a treat to drive - who needs a V8!

Dick