Dodge Repair: Replacing Power Steering Pulley, power steering pump, dodge hemi

Question
How do I, step by step, change the power steering pump and pulley on my 5.7L Dodge Hemi. (2005 Dodge Daytona) 2 dr. Not 4wd. I purchased and installed a new pump, but when attaching the pulley and tightening it, the pulley cracked. Help! this is our only vehicle.  

Answer
REMOVAL
Remove power steering pump from engine. (Refer to 19 - STEERING/PUMP - REMOVAL)



CAUTION: Do not hammer on power steering pump pulley or shaft to remove power steering pump pulley. This will damage pulley and power steering pump.

Mount Puller (2), Special Tool C-4333, on power steering pump pulley (3). Mount Puller (with power steering pump (1)) in a vise as shown; Do not mount pump in vise. Placing Puller in vise will keep shaft of pump from turning while removing pulley (3) and help keep tension on Puller and pulley hub.
Tighten Puller and remove pulley from shaft of power steering pump.
NOTE: Inspect pulley. Replace if pulley is bent, cracked, or loose.