Dodge Repair: headlights, projector headlamps, negative cable


Question
I just bought some new projector headlamps for my 2001 dodge ram. and I just cannot figure out how to take off the original and replace it with the new ones. How can you help me?

Answer
REMOVAL
Disconnect and isolate the battery negative cable.
Remove push-in fastener attaching seal to radiator closure panel.
Remove park and turn signal lamp.
Remove screws attaching top of headlamp module to radiator closure panel (Headlamp — SLT).
From behind front bumper, remove screws attaching bottom of headlamp module to radiator closure panel.
From behind the bumper, loosen the bumper mounting nuts to allow the bumper to lower for clearance. This is only necessary on the side to be removed.
Separate headlamp module from radiator closure panel.
Disengage wire connector from headlamp bulb(s) (Headlamp-Sport).
Separate headlamp module from vehicle.