Dodge Repair: 2000 Dodge Neon Drivers Side Headlight Bulb, halogen bulbs, hood latch

Question
This bulb seems impossible to get to.  There is an engine part in the way and I cannot get my hand in there to pull out the socket.  Do I need to pull out the entire headlight assembly?  
The passenger side light has easy access.
Thanx in advance for your help!!

Answer
HEADLAMP BULB
REMOVAL
Release hood latch and open hood.
Remove screws attaching headlamp module to upper crossmember.
Remove headlamp module from vehicle.
Disconnect wire connector from back of headlamp bulb.
Rotate retaining ring counterclockwise one quarter turn.
Remove retaining ring from headlamp module.
Remove bulb from headlamp module
Headlamp Bulb
INSTALLATION
CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.

Install bulb into headlamp module.
Install retaining ring to headlamp module.
Rotate retaining ring clockwise one quarter turn.
Connect wire connector to the back of headlamp bulb.
Place headlamp module in position.
Install screws attaching headlamp module to upper crossmember.
Close hood.