Dodge Repair: master, car makes and models, chrysler service


Question
QUESTION: kevin, you are not master mechanic unless you are certified in all 8 areas. there is NO such thing as a master A/C tech or a master brake tech, ECT. next thing why on earth would you want to remove the accessory drive belts and generator? that is a lot of unnecessary work! the way you do it is to remove dipstick tube, remove hose clamps. place dipstick back in place so you do fill the oil pan with coolant. then you use a 1/4" 1omm with swivel.

ANSWER: I am a master ac, master electrical, master drivablity,master body mechanical, master brakes tech in accordance to Chrysler  training and ASE.   I could care less about the outside world of automotive calls a master. and as for what ever your beef is with how things are done  90% of the things I post on here are right from the Chrysler service manual doing it the correct way for people who do not have experience in doing this and want to have it done right. IF u are on here asking me a question then u must not know how to do something as well  so i hope this helps u out.

---------- FOLLOW-UP ----------

QUESTION: the real world does care about what your chrysler training classes. A master mechanic (in the real world) can fix anything on the vehicle, certified in all 8 areas is a master. if you were as good as you think you are, you would not be working in a dealer, you would be working for the manufacturer. I have been a master ASE tech plus adavanced engine performance, engine builder, cylinder head and block specialist for over 20 years. I have forgotten more then you were taught at CAP school.

ANSWER: then why are u even on here   trying to catch up with the modern times?? I am more trained in Chrysler an other cars  that why I like I  I know most in and out of electronics and the systems on a Chrysler  no where  and I mean no where did I say I can work on everything and all other car makes and models  where on this site have u seen me post something that was not true? or in the right direction?

---------- FOLLOW-UP ----------

QUESTION: you can't do axle work or transmission work.


engine cranks but will not start. could a bad battery cause this?

Answer
are u some old man that is looking for fun or something?  or are u trying to learn all the stuff u have forgotten by reading online?    I am gonna be the bigger man here and let u win  if thats what U want  I dont have time to mess with some one that has a ego issue or a grudge about something.