Dodge Repair: follow up question about 1993 dodge intrepid, cam sensor, dodge intrepid

Question
-------------------------
Followup To
Question - 1993 dodge intrepid---stalling problems!
dear pete...thank you for your promptness in aswering my email.. but you said it was the cam sensor. i dont know if you misread my other email or i didnt state it good enough, but i said i changed the cam sensor(put brand new one in) and when we did that it did run good for like 140 miles, then it started stalling again. we took the new sensor up and had it check to make sure it didnt go bad and they said it was fine. please can you figure out the problem we are running out of ideas. only other thing we can think of doing is replacing the computer module and that cost a good bit of money to do especially if thats not it. i would like to know if the coils in it could be a problem as well and how can we find out if they are bad or not.  

Answer
hello
i am sorry if that happend after 12 hour days in my shop some time i get very tired it could be very well a bad coil i would take it and have then checked at a parts store . and i still wonder about the cam senser . hope they checked it wright and not blowing you off pete