Ford Repair: bronco brake rotors, wheel studs, calliper

Question
How do you seperate the hub from the rotor. the truck is a 94, so it has 4wheel ABS.

Answer
Hi Rick,
Just beat the wheel studs out with a hammer. Install new rotor and new studs by hammering them back in. It's easier to just buy a complete rotor, but more expensive.
If you are talking about removing the rotor from the vehicle, you need special tools and sockets to do that. You first remove the calliper and pads. Then the silver cover needs to be removed, the lock ring and a special socket to remove the nut, then the lock plate then the second nut. GOOD LUCK!

Jeff
AllExperts