QuestionQUESTION: I own a 2004 Jeep Liberty. I Had after-market speakers installed. The stock tweeters were left in because the after-market speakers had tweeters enclosed in the center. The stocker tweeters are now blown. I don't need to remove the stock ones all I want to do is cut the wire connected from the after-market stereo. How do I detach the dash panels to gain access to the speakers?
ANSWER: which panel are u talking about?
---------- FOLLOW-UP ----------
QUESTION: It is the very top one closest to the windshield. But I figure you have to take others off to get to it.
Answereverything will just pop up
INSTRUMENT PANEL
Disconnect and isolate the battery negative cable.
Remove the A-pillar trim (Refer to 23 - BODY/INTERIOR/A-PILLAR TRIM - REMOVAL).
Remove instrument panel top cover (Refer to 23 - BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TOP COVER - REMOVAL).
Remove speaker mounting screws (INSTRUMENT PANEL SPEAKER).
Remove speaker and disconnect the wire harness connector.
